Home > Projects > Content
high-speed disperser hydraulic system common fault characteristics
- Jul 23, 2018 -

Guide: High-speed disperser hydraulic system common fault characteristics 1 joint connection leak. 2 The movement speed is unstable. 3 The valve plug is stuck or the movement is not flexible, causing the actuator to malfunction. 4 The damper hole is blocked, causing the system pressure to be unstable or the pressure to be lost. 5 high-speed disperser hydraulic system valve components missing spring or...

  Common fault characteristics of high speed disperser hydraulic system

  1 The joint is leaking.

  2 The movement speed is unstable.

  3 The valve plug is stuck or the movement is not flexible, causing the actuator to malfunction.

  4 The damper hole is blocked, causing the system pressure to be unstable or the pressure to be lost.

  5 high-speed disperser hydraulic system valve components missing springs or seals, or the pipeline is connected to the wrong and the operation is chaotic.

  6 improper design, improper selection, so that the system is hot, or the movement is not coordinated, the position accuracy can not meet the requirements.

  7 The quality of the hydraulic parts is poor, or the installation quality is poor, which makes the valve movements unclear.

  8 Long-term work, the aging of the hydraulic system seals of high-speed Disperser machines, as well as the wear of consumable components, etc., caused the leakage of internal and external systems to increase, and the system Kui decreased significantly.