Home > Projects > Content
High-speed disperser hydraulic system loop analysis
- Sep 26, 2018 -

1. Bucket circuit.

1) Loosen the oil pipe of the high-speed disperser bucket cylinder with the rod cavity, operate the handle, slowly pull the handle to the bucket outward direction, until the pipe joint discharges new oil, clear the pipe joint and connect it; Rodless cavity oil pipe joint, slowly lift the boom to make the bucket about 1.5m off the ground;

2) Then slowly operate the bucket handle to make the outside turn to the top, drop the boom to make the bucket touch the ground; operate the bucket handle, slowly pull the handle in the direction of the bucket to discharge the oil pipe Old oil

3) Remove the pipe joint and connect it; lift the boom to make the bucket 2.5m from the ground, and turn the bucket several times inward and outward to discharge the air remaining in the circuit.

2. Stick circuit.

1) Disassemble the oil pipe joint of the rodless cavity of the high-speed disperser arm, operate the handle, slowly pull the handle in the direction of the inner rotation of the stick, and discharge the old oil in the oil pipe until the new oil flows out;

2) Clean the tube and connect it; loosen the rod tube joint of the stick cylinder, release the old oil in the rod cavity, slowly pull the handle to the outer direction of the stick, and eject the old tube Before the oil discharges the new oil, clear the pipe joint and connect it; lift the boom and turn the arm to the inner and outer force several times.