Home > Projects > Content
High-speed disperser with wheeled coupling installation precautions
- Sep 10, 2018 -

1. The coupling must be fastened to the motor shaft with a tension bolt.

2. Tightening high-speed disperser with wheeled coupling bolts must have reliable relaxation measures.

3. The coupling and the v-belt must be equipped with a protective cover.

4. The large-size v-belt type coupling or v-belt is too large, and should be supported on the opposite side of the motor shaft. The support bearing housing should be coaxial with the motor shaft during installation.

5. When installing a high-speed disperser with a wheeled coupling, the dimension F in the figure must be larger than the size of El-2mm.

6, to ensure that the pin of the elastic sleeve pin coupling can be removed.