Home > Projects > Content
high speed dispersing mixer during operation Introduction of the characteristics
- Aug 03, 2018 -

1. The strong centrifugal force breaks the material from the radial direction into the narrow and precise gap between the stator and the rotor. At the same time, it is subjected to the combined action of centrifugal extrusion, liquid layer friction and hydraulic impact, and the material is initially dispersed.

2. The rotor rotating at high speed of the disperser produces a linear velocity of at least 15 m/s. The material is fully dispersed and broken under the action of strong hydraulic shearing, liquid layer friction, tearing collision, etc., and is simultaneously ejected through the stator slot at a high speed.

3. The material of the disperser is continuously ejected from the radial high speed, and the flow direction is changed under the resistance of the material itself and the wall of the container. At the same time, under the action of the upper and lower axial suction forces generated in the rotor area, the upper and lower sides are formed again. Two strong turbulences. The material is recycled several times to complete the dispersion process.