After the installation and commissioning of the real stone paint mixer, the production company will deliver it to our production and use. What problems should we pay attention to when the new equipment is put into production for the first time?
1. The first thing to do is to check all the instruments of the device to see if the pointer is zero or the instrument is complete;
2. In the process of scientific speed regulation of equipment, it must be slowly increased from low speed. It is best not to use high speed to adjust, which will cause the equipment stirring shaft to be out of sync;
3, the paint mixer can not be directly heated when not in production, and the equipment must be powered off when the production is stopped;
4. Equipment, including all instruments or instruments carried on the equipment, should be placed in a dry and clean place;
5. During the mixing process, it is found that the shaking of the equipment is particularly severe. It is necessary to check whether the support feet of the equipment are stable;
6. It is best to stir at medium speed during the production process, which can extend the service life of the equipment;
7. After the installation is completed, it is necessary to check whether the power cord is connected to the ground wire. If there is no need to improve it, it can be used normally;
The above 7 small points are the precautions before the start of the paint mixer, and the first step can be used successfully for decades.
Related Industry Knowledge
- Mixer power conditions
- Mixer Setup
- Mixer adjustment
- Mixer maintenance
- Mixer works
- Blender by job classification
- Ever mixer
- Mixer device classification
- Mixer according to the discharge pattern classi...
- Mixer shape classification
- How to solve the problem of real stone paint mi...
- Why is the price of real stone paint mixer affe...
- How should the real stone paint mixer carry out...